PSSA Flag
The Parker and Seal Sailing Association

Skip Navigation Links
You are here: Skip Navigation LinksHome > Forum
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
View
Go to last post Go to first unread
Salt  
#1 Posted : 02 July 2018 17:51:44(UTC)
Rank: Newbie

Posts: 2
Location: Devon

Can anyone tell me the measurements of the nylon keel sliders which are situate on the top corners of the sliding keel, fore & aft and which are visible through the inspection hatches. They guide the keel down inside the keel box.
I am considering replacing them and may need to have new ones machined. I need to know the width, depth & height (obviously when new & not worn!). The foreward ones are different to the aft ones so I need the measurements of each.

If anyone knows of a supplier "of the shelf" or a copy of the original specification with measurements,then so much the better.
Richard Salt
Martin Watson  
#2 Posted : 08 July 2018 10:21:19(UTC)
Rank: Advanced Member

Posts: 51
Location: nr. Billingshurst, West Sussex

Hi Richard, don't know if it's any help, but on my Parker 27, the keel is left in the initial "blank" thickness where the sliders are located, ie in my case nominally 60mm thick across the whole keel front to back, this means the sliders are just four oblongs of material the same dimensions front and back, after all, it makes sense not to make that area foil shaped as it is always encased in the keel box. Don't know where you are based but in Waterlooville near Portsmouth, there is a plastics supplier called Ensinger who you can walk into and ask to buy offcuts of various sizes and thicknesses of most types of plastic including Delrin, Acetal and PTFE for peanuts, often only a donation to the coffee fund. I doubt your keel would be any different so once you know the original thickness, you should be able to buy some offcuts of that thickness and trim to shape. I would be very surprised if they were wedge-shaped or different thicknesses, it would unnecessarily increase the production time and costs. regards Martin Watson P27-Frith
Ensinger,
Plastics Manufacturing
Waterberry Drive, Waterlooville, PO7 7XX · (023) 9224 5555
Martin Watson
Salt  
#3 Posted : 09 July 2018 09:00:10(UTC)
Rank: Newbie

Posts: 2
Location: Devon

Morning Martin, many thanks for your helpful reply particularly the details of the supplier in Waterlooville. Unfortunately, the width of the top of the keel on my Parker 21 differs, 39mm aft and 48m foreward so the sliders have to be of different widths as the width of the keel box is uniform throughout. However, once the keel is out. the correct measurements of the sliders ascertained, the shape of the existing ones can be used as a template. Regards Richard Salt
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.