Hi

Has anyone any information on a replacement cutlass bearing for a Parker 325. Shaft is 30 mm, are they a standard size. I will be replacing the stern gland (PSS type) at same time

How to remove and replace?

Regards

Barry Tiernan
Sulito 39

Hi

Just replaced them myself.

You should find a couple of allen key grub screws holding the cutlass bearing in place, after cleaning off the muck around the bearing you should be able to draw it out. (prop shaft needs to be removed first)

I had wear in the prop shaft so replaced the shaft with a 1" new shaft, as 30mm was bigger than needed

---