roblpm
  • roblpm
  • Advanced Member Topic Starter
2018-03-18T12:20:41Z
Hi

One of the bolts securing the pulpit to the boat on my Parker 275 has sheared.

Its not clear how to repair.....!

Can anyone comment on the design? The anchor locker is glassed in.

So either the pulpit was attached to the toe rail before it was screwed down or there is a gap inside the boat under the headlining at the sides of the anchor locker where access can be obtained.

Then as the bolt seems to come out the bottom of one of the vertical shafts of the pulpit is it actually studding? With a thread in the pulpit? A nut under the toe rail? Or a bolt under the toe rail?

Any ideas where to start would be gratefully received!

Cheers

Rob


Rob

Parker 275 Number 7 Nimrod

Port Edgar Marina

roblpm
  • roblpm
  • Advanced Member Topic Starter
2018-03-18T12:59:45Z
I think I am being a numpty. Didn't look at it properly this morning as it was blowing a gale and bad swell in the marina!

The bolts are outside the hull i think!!!


Rob

Parker 275 Number 7 Nimrod

Port Edgar Marina