Ken Surplice
2012-09-10T20:24:55Z
Folks,
Let's start a list of parts used on this class of yacht. Reply with your discoveries as you find them. Let me start.

COCKPIT LOCKER HINGES: Seasure stainless stub hinge 39x82mm, part 23.22CRD from Seasure, or XM23-22 in Force 4 chandlers. Price: £6.45

Cheers-Ken

Ken Surplice
Commodore
Ken
Andrew D
2012-09-12T21:09:40Z
Great Idea.
Here are some parts I have found this year :-

Circulation pump for Martec hot water system on Yanmar 1GM10.
Available from
Aquafax Ltd
14 Dencora Way
Sundon Business Park
Luton
Beds
LU3 3HP
01582568700
Stock Code 10-24501-03 Circulation Pump CM10p7-1 16mm Ports 12v £119
Zinc Anode for above
Stock code 16-917300 1/4" NPTF-15mm £11.40

Forward Keel Roller (Made to Measure)
Versatile Marine
Challenger Marina
Falmouth Road
Penryn
cornwall
TR10 8AD
£15 for 2

Domestic Pressurised Water Pump
Caravan Accessories CAK Tanks Ltd
Aqua House
10 Princess Drive Ind Estate
Kenilworth
Warwickshire
CV8 2FD
01926854271
SF2095 Trailking 10.6ltr 12v 30psi (turned down to 20 psi)
£85

Folding Two Blade Propellor
Flexofold
info@flexofold.com
Item 1409R 14x09 R bladeset
Item 12-1 1" 1:12, 2-blade hub
6,528 DKK (Danish Kroner)

Hull Strip Decals
Hutson Signs
65 Wide Bargate
Boston
Lincolnshire
PE21 6SG
01205 362107
signs@hutsons.ltd.uk
£55 for 20m

Hope this adds to the list.

Andrew Downie
Parker275/40 VELA
DickG
2012-09-13T19:39:19Z
Electric keel winch control switches for the low current control circuit that operates the reversing relay - Contact block Schneider / Telemecanique type ZB2-BE101.

Why do I know this?? I just had a fault with the "up" button not returning to open circuit when released, followed by a mad scramble to stop the engine and isolate the batteries before the keel went too high. I haven't replaced the contact block yet, but removing the block, dousing it with contact cleaner and replacing it seems to have fixed it for now.
A replacement is now a winter maintenance list item!


Dick
Dark Star P275 No 36
Dick
Dark Star P275 No 36
BobS
  • BobS
  • Advanced Member
2013-01-22T13:59:18Z
After a chase around with the original light supplier, I found this at the local chandlers. Fits bi-colour pulpit light and aft white light.
Navigation Bulb Bay 15D Offset: Holt Marine Pre-packs Code R997 12V 25W
Mind you was £8 plus
Bob Simpson
geoff.sheddick
2013-01-24T19:11:35Z
Just a word of caution note about light bulbs for Nav lights - do look inside your lights,or check the manufacturer's website, before ordering.

There were three of those described by Bob amongst the spares left for me by the previous owner of my boat, but they fit nothing aboard....
[I've got 1x 10w, 1x 25w, both free to a good home...geoff.sheddickatgmail.com]
...certainly not the smallest size Hella nav lights fitted to my 1989 P27, which use festoon bulbs.

Although just to be different, my Hella stern light has a most unusual festoon bulb with a 2 pronged sleeve on one end... I haven't manged to track these down, so may have little option but to renew the light...

Geoff Sheddick
Parker 27/146 "Stroller'
Geoff Sheddick
Parker 27/146 "Stroller'
Phill
2013-12-31T13:18:49Z
Circuit beakers for the switch panel are made by ETA and are available from Farnell Electronics amongst others. Beware some sites charging £28 each.

http://uk.farnell.com/js...ch&_requestid=213916 

or visit farnell.com and serch for '1110 circuit breaker'
PeterL
2014-01-18T09:42:56Z
Aluminium Rudder Stock components – sourced Dec ’13

Pair of 1000 x 350 x 9.5mm grade 6082 T6 ‘blanks’ for home shaping and drilling, £135 inc. delivery

Aluminiumwarehouse.co.uk


Hard anodising after fabrication.
New on plates,strip and re-anodise refurbed channels. £75 ex transport.

Staraluminium.co.uk ( Erith Kent if you are local)