Search

John Clack is attending the event Laying up lunch

3 weeks ago

John Clack is attending the event Cowes Rally

3 weeks ago

John Clackcreated the topic: Isle of Wight Jazz Weekend 2026

I was at Carol and Phillip’s very enjoyable BBQ and was asked about the Isle of Wight Jazz Weekend. I’m helping to organise that, so I’m afraid I...

1 month ago

John Clack is attending the event Wootton Creek Rally/RVYC

1 month ago

John Clackreplied to: New Depth Sounder

Manual and Bob, On reflection Manual I think the red object on the left is in fact a blank. As Bob said, he found the actual electronics elsewhere!...

1 month ago

John Clackreplied to: New Depth Sounder

Hello Bob, Welcome to the PSSA and the forum. You're not wrong! My decision was based on the fact I already had two holes in the bottom of my boat,...

2 months ago

John Clackreplied to: Keel problem - jammed or ram problem

Hi Dirk, Lots of people were surprised that my keel wouldn't lower under gravity. In my case it was because crevice corrosion had caused the ram to...

2 months ago

John Clackreplied to: Keel problem - jammed or ram problem

Hi Dirk, You have the same symptoms as I had. I had an iron cylinder and a steel ram. The keel had jammed fully up due to crevice corrosion. Given...

2 months ago

John Clackreplied to: Planning a new engine for 335

Thanks for reminding me Mike - yes I had the higher output alternator fitted - 125A if I remember correctly. I've attached the fuel combustion...

2 months ago

John Clackreplied to: New Depth Sounder

Hello Manuel, I had a similar set up when I bought my 325 - I think Bill Parker went with the same NASA log/depth for all builds. I replaced the...

2 months ago

John Clackreplied to: Planning a new engine for 335

Completely agree with all of Peter Dann's post. By coincidence we have an identical setup. The 20HP is quite sufficient and the Featherstream is a...

2 months ago

John Clack is attending the event Shoreside BBQ

2 months ago

John Clackreplied to: Solenoid for Hydraulic Ram

Hello Dennis and Anne, That's very useful to know. At that price its's worth getting a spare. I went onto the web site but i'm not too sure which...

5 months ago

Navigation

Activity Feed

My Profile