I have noticed a small split appearing in the glass fibre on the leading edge of the rudder where it raps around the stainless rudder shaft. I think I will have to have the rudder out to check, and reinforce with epoxy and glass around this area.

Has any body else had problems with the structural integrity of their rudder and what steps have you taken to rectify.

Thanks.

Mike Edwards

Seal 28 "Aztec"

I have now made a drawing of the rudder. see below

http://www.swatchway.pwp.blueyo...ztec/seal28%20rudder.gif 

Mike Edwards

Seal 28 "Aztec"