Hi. Has anyone replaced their Houdini hatch seals?
Where is the best place to get replacement seals?
I assume the seal comes "off the roll" in which case how is the joint made water tight?
Thanks Adrian.
Parker 235 no12 "Vienna"

A good place to start would be www.sealsplusdirect.co.uk . My hatch is not a Houdini, but these people had the right neoprene section for it.



Neil Sinclair
Seal 28/27
'Andiamo of Exe'

---

I have recently replaced the seal on Mañana.
I purchased it from ebay


http://cgi.ebay.co.uk/Ho...s_SM?hash=item2ea9f5fd43 

I used silicon jointing compound from B&Q between the two ends to ensure a good seal.

I purchased 3m and that was sufficient

It provided an effective seal. However the it still leaks a little where the glass joins to the frame. I may have to go for a gatch replacement.

Thanks for the replies. I have found out that there are different section shapes, so new time down to the boat I will check what I need. I am going to the boat-show in January, I see that Houdini have a stand there.
Thanks again for your replies
Adrian