Hi all!
I am the fresh owner to P31/28 Kreiertje. The survey I have had done on the boat discovered debris in the roller that is on the bow-side of the keel at the hull bottom. In order to restore the roller to its function (probably replace it with a new one) I tried to remove the metall plate. All 4 screws came off and I carefully cut around the plate with an oscillating tool, a bit short of the height of the plate. I then tried to force the plate off with a sliding hammer, but it will not move even a bit. The keel is pulled back, so it is not on the roller. Does anybody have a trick to get the plate out? Any suggestion is very welcome.
Kind regards,
Michael Scheck

Click to View Image0 View(s)

Click to View Image0 View(s)