Kreiertje
2026-11-15T13:30:00Z
On my new boat the traveller was taken off and the mainsheet block was fitted in the cockpit. I would like to restore the traveller to the original state, freeing up the cockpit again. However I am wondering if there was a good reason to change from traveller to the mainsheet more aft and with less friction probably. Is this a common thing to change on a P31? It seems that the two cornerpieces with the blocks still exist, but not the rail itself. So if I where to change it back, what rail would I need? How is it fitted to the boat? I would be interested in some closeup fotos of the original setup, so if anybody has some or can take some, it would be great if you can post them here. Attached is a picture of what it looks like on Kreiertje at the momen.

Thanks!! Michael Scheck

IMG_7621.JPEG

Click to View Image1 View(s)

PeterDann
2026-11-16T11:08:20Z
Hi Michael

My boat is a 325 not a 31 but I believe the traveller arrangements and options are similar: some boats have a traveller in the cockpit and other have it on the coachroof. The drawback of the cockpit is that it splits the seating; the drawback of the coachroof is that (on my boat with a wheel) the helm cannot reach the mainsheet. If you have the mainsheet led aft to the helm without a traveller you cannot centre the boom in light winds, and you risk pulling the leech too tight in trying to do so. Your photographs don't show whether you have a traveller in the cockpit but I assume not, and this is why you want to reinstate the traveller?

If you are happy with the traveller on the coachroof and you are comfortable to reach it from the helm (or always sail with crew who can), then all you need is a standard mainsheet track from Lewmar or similar. They generally come in two kinds: those designed to be bolted onto a load-bearing surface and those designed with a section below the track which takes the load: you need the second kind, with integrated blocks on the end for the traveller ropes, and a pair of cleats to take these ropes.

Because I sail single-handed and cannot reach the traveller I have then led my mainsheet tail to a floating block on a dyneema bridle in the cockpit, but this is not to everyone's taste!

I can take pictures of my set-up when I am next on the boat (next week) unless a helpful 31 owner reads this first and can post something even better!

Peter


Peter Dann

Blue Moon 325/32

2026-11-21T15:01:14Z
Michael

Just taken photos of my P31 with a coach roof traveller, which I believe was installed like that when built.

This track appears to be bolted through on each bolt hole, although not removed lining to check the fittings etc.

I have traveller ropes which work well.

Noting Peter’s comment about the helm reaching the mainsheet, I added a cam-cleat on the rear edge of the coach roof, when sailing I leave the clutch open and just use the cam-cleat, with the sheet in hand and easy to flick up to release the mainsheet as and when required.

I hope this makes sense

Hopefully I have attached photos correctly, as was struggling, so if do not come out, email me and I can ping them over

Cheers Chris

IMG_4231.jpeg

Click to View Image1 View(s)

IMG_4230.jpeg

Click to View Image1 View(s)

IMG_4232.jpeg

Click to View Image1 View(s)

IMG_4233.jpeg

Click to View Image1 View(s)

image.jpeg

Click to View Image1 View(s)


Christopher Day

P31/5 Sula