Brian R Fisher
2007-12-03T19:04:54Z
We have just bought a radio for our 235.

The aerial and cable is already fitted and runs as far as the switch panel, but I would welcome any advice on where to site it and where to run the cable/s. Is it best to mount it in the cradle/bracket supplied or cut a hole in the bulkhead and have the rear part project into the locker?

My first thoughts are to put it just inside the boat on the port side, somewhere above the chart table.

Many thanks.

Brian and Alison Fisher
235 'Thrift'
PaulBurton
2007-12-03T19:19:37Z
I take it you mean a VHF...? not a FM.

Mine is here...

UserPostedImage

Sorry the image was taken with my phone....

Paul Burton.

Parker 235/ 40 Lady Penelope...

Paul Burton.

Wayfarer no.9362
PaulBurton
2007-12-03T19:24:21Z
I think the locker would be to damp....you would need to protect the back from knocks and damp...

Where mine is I can see at a glance the channel it is on. I can also just about reach the mic from outside.

I disconnect mine in the winter and leave it at home...which is easy to do on the bracket and the wires just plug in.

Have you got your new mast sorted out ???

Paul Burton.

Parker 235/ 40 Lady Penelope...

Paul Burton.

Wayfarer no.9362
David Pocock
2007-12-03T19:24:50Z
My radio (an Icom 421) is mounted to the right of the switch panel and cut into the above-seat locker. It seems a sensible location, and I cannot think of anywhere I would prefer to have it. I cannot help with the wiring because it was Bill Parker who put it there, but there does seem to be quite a few wires behind it!

David Pocock
Parker 235/52 Arawa
David Pocock
Parker 235/52 Arawa
David Pocock
2007-12-03T19:30:07Z
Now that I have seen Paul's post, I realise that my locker opening does not go as far aft as his which is how my radio can fit in with wood all around.

David Pocock
Parker 235/52 Arawa
David Pocock
Parker 235/52 Arawa
Brian R Fisher
2007-12-03T20:35:44Z
Thanks for the replies, everyone - it was worth asking as always!!I maust say I am impressed with so many replies in such a short time!!

Yes, I have got my new mast - many thanks to the insurers and Bill. When I work out how, I will post some pictures - they should raise a few smiles and add to the debate about the best way to take down a mast!!
I expect to have it sorted and up ready to sail soon - certainly at some point over Christmas. It just seems lately that the weekdays are fine and the few days that I could have done it at the weekend are rainy!!

Graham Reed
2007-12-06T15:25:32Z
Hi Brian
I fitted a VHF Radio on a shelf made from a piece of aluminium
angle 6" x 3" x 1/4" cut to about 200mm , black anodised and bolted
through the bulkhead high up at the end of the port bunk,it is connected to a garmin chartplotter on a RAM swivel mount.This means I can view the screen from inside or outside and reach in to the radio mike if neccessary.I have a few photos but wasn't successful in attaching them.
Cheers
Graham Reed 'Petra ,235 no 31'
Graham Reed
2007-12-07T09:19:57Z
UserPostedImage
Here is a photo of the vhf/gps installation on my 235 .
Graham Reed
2007-12-07T14:17:18Z
Graham - what a neat GPS installation!

I have same Garmin unit, it was mounted outside last season but sunlight a problem and when at anchor it's better to be able to monitor depth so I'm currently moving it inside.

I was going to make a ply swivel bracket but you call yours a 'RAM' bracket - is this easily available, and from where?

Stephen Godber
235/51 "Exodus"

Stephen Godber
235/51 "Exodus"
PaulBurton
2007-12-08T17:03:08Z
UserPostedImage

Found these on this web page http://www.ram-mount-uk.com/swing-arms-mounts.htm  no prices though...

Paul Burton.

Parker 235/ 40 Lady Penelope...

Paul Burton.

Wayfarer no.9362
PaulBurton
2007-12-08T17:11:43Z
Just found the price.....£75.00....not cheap...

Paul Burton.

Parker 235/ 40 Lady Penelope...

Paul Burton.

Wayfarer no.9362
2007-12-09T18:04:24Z
Thanks Paul - nice brackets, but at £75 I'll adapt something. Thanks again!

Stephen Godber
235/51 "Exodus"

Stephen Godber
235/51 "Exodus"
Graham Reed
2007-12-10T09:43:55Z
Hi Stephen
Sorry for delay , away from my pc for a couple of days.I searched
http://www.gpsw.co.uk 
part no RAM-109V-2.I discovered that there are wires for the starboard side cabin lights running close to the 'edge' where the holes for the bracket were drilled so take care when drilling whatever bracket you use.I have found it useful as it extends far enough to enable you to sit down inside when when putting in your route for the next day.
Cheers
Graham
2007-12-11T20:45:46Z
Thanks alot graham - I'll have a look - and thanks for the warning about the wires, I'll try and avoid them!

Stephen Godber
235/51 "Exodus"

Stephen Godber
235/51 "Exodus"